Skip to content
Serving Miami Beach and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (786) 384-5881

Furnace Repair in North Bay Village, FL

Serving North Bay Village and nearby cities. Tell us about the job and we’ll call you back to confirm the details.

Tell us what’s going on

Prefer to talk? (786) 384-5881

The short answer

In North Bay Village, furnace repair usually means fixing the electric heat strips or heat pump inside your air handler, not a gas furnace. We test the heating side, find what failed after months of disuse, and repair it so your system heats safely when you need it.

Most North Bay Village homes don't have a gas furnace in a basement. Here, "the furnace" is usually the heating side of an electric air handler, either heat strips (electric resistance coils) or a heat pump running in reverse. Because air conditioning runs most of the year in this climate, the heating parts can sit unused for months. Then the first cool morning arrives, someone switches the thermostat to heat, and nothing happens, or the house fills with a burning-dust smell. FirstChoice HVAC Repair is based in Miami Beach, about 2 miles southeast of North Bay Village. We repair electric furnaces, heat strips, and heat pump heating for homes, condos, and apartments throughout the village and nearby Miami-Dade communities.

What "Furnace" Means in a North Bay Village Home

Because heating needs here are light, most local systems are built around cooling. The heat usually comes from one of three setups. Knowing which one you have helps us bring the right parts and helps you describe the problem when you call.

If you aren't sure which one you have, check the label on the indoor unit or the thermostat settings. An "Emergency Heat" or "Aux Heat" option usually means a heat pump with backup strips.

  • Electric furnace or air handler with heat strips: resistance coils inside the indoor unit warm the air as the blower pushes it through.
  • Heat pump: the outdoor unit reverses its refrigerant flow to move heat indoors, often with heat strips as backup.
  • Packaged or wall units: some condos and older buildings use self-contained units with built-in electric heat.

Common Heating Problems We Fix

Heating parts that sit idle through a long cooling season fail in predictable ways. When we come out, we check the whole heating circuit instead of guessing at one part.

  • Heat strip elements that are open or burned through, so the blower runs but the air stays cool
  • Tripped or failed limit switches and thermal fuses that shut the heat off for safety
  • Sequencers or relays that don't bring the strips on, or don't turn them off
  • Breakers that trip as soon as the heat starts, often from a shorted element or a loose, overheated connection
  • Heat pumps stuck in cooling because of a faulty reversing valve or a thermostat wiring problem
  • Thermostats set up for cooling only, or with the wrong heat-pump settings
  • A strong burning smell that lasts longer than the first few minutes of a season's first use

Why Coastal Conditions Matter for Your Heating

North Bay Village sits on islands in Biscayne Bay, so salt air and humidity reach equipment year-round. From May through October, the wet season brings frequent afternoon thunderstorms and heavy humidity. The air handler that holds your heat strips is also handling a lot of moisture from cooling. Over time, that can corrode electrical terminals and connections in the heating section.

Storms add another risk. Hurricane season runs from June 1 to November 30, and power surges or outages during that stretch can damage control boards, relays, and thermostats. Often nobody notices until the heat is turned on months later. If your heat stopped working after a storm, mention it when you schedule so we can look closely at the electrical parts.

How a Repair Visit Works

We start by asking what you noticed: no heat, weak heat, a smell, a tripped breaker, or a noise. Then we confirm the system type and safely check power to the unit. We test each heating element, limit, and relay, check the thermostat settings and wiring, and on heat pumps, confirm the system actually switches into heating mode.

We explain what we found in plain terms and tell you what the repair involves before we do the work. If a part is worn but still working, we'll point it out so you can plan for it, without pressuring you to replace it now.

Repair or Replace?

Most heating problems in local homes can be repaired, since heat strips and controls are replaceable parts. Replacement is worth discussing when the air handler or heat pump is badly corroded, when it keeps failing, or when cooling performance is also slipping.

If you do replace a central system, Florida Power & Light runs a Residential HVAC program with rebates on qualifying high-efficiency central air conditioners and heat pumps. These rebates go through participating contractors at installation, and we confirm the current terms before quoting them. The federal 25C tax credit for heat pumps applied only to systems installed before December 31, 2025, so it does not cover new installations.

More services in North Bay Village

Related

What to expect

How a visit goes

  1. Find the cause first

    We test and inspect before we recommend anything, so a repair addresses what is actually wrong instead of just the most obvious symptom.

  2. Explain your options clearly

    You get a plain-language explanation of what we found and the choices available, including whether a repair or a replacement makes more sense for your system.

  3. Plan for the local climate

    Humidity, salt air, and nearly year-round cooling shape how we size, install, and maintain equipment, so recommendations fit how your system is really used.

FAQ

Common questions

Don’t see your question? Call (786) 384-5881 and we’ll talk it through.

Why does my heat smell like burning when I first turn it on?

Dust settles on heat strips during months of cooling-only use, and it burns off when the strips first heat up. A light smell that fades within a few minutes is normal. If the smell is strong, lasts, or comes with smoke or a tripped breaker, turn the heat off and call for service.

My blower runs but the air is cold on heat mode. What's wrong?

Common causes are a burned-out heat strip element, a tripped limit switch, a failed sequencer or relay, or a heat strip breaker that has tripped. On heat pumps, it can also be a reversing valve or thermostat setup problem. We test each part to find the actual cause.

Do you repair heat in North Bay Village condos and apartments?

Yes. We work on air handlers with heat strips, heat pumps, and packaged units in houses, condos, and apartments. If your building has rules about access or work hours, let us know when you schedule.

Should I test my heat before it gets cool?

Yes. Running the heat for a few minutes in the fall shows you whether the strips and controls still work, so you aren't caught without heat on the first cool night. If it fails, you have time to schedule a repair.

Is emergency heat the same as my furnace?

On a heat pump system, emergency or auxiliary heat uses the electric heat strips alone, without the heat pump. If your system only heats on emergency heat, the heat pump side may have a problem that needs diagnosis.

What other areas do you serve?

Besides North Bay Village, we serve Miami Beach, Surfside, Bay Harbor Islands, North Miami, North Miami Beach, and Miami.

Need Your AC or Heat Pump Looked At?

Tell us what your system is doing and where you're located. We'll schedule a visit, diagnose the problem, and walk you through your options before any work begins.

Call (786) 384-5881 Request Service